€517,00 – €1445,00 VAT excl.
Independent face plate LUD
A four-jaw chuck in which the clamping of the workpiece is ensured by an independent movement of the jaws by means of a trapezoidal screw engaged with the jaw.
• chuck body – ductile cast iron
• 4-jaw chuck
• clamping the chuck on the machine spindle
• Type M2 through cylindrical mounting with screws from the rear or front mounting
• Type A, B, D using an intermediate flange
 |
 |
|---|
| Ø | E H7 | F±0,2 | G | H | J | K | O | P | R | S | T | U |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 85 | 62 | 72 | – | 34 | 17 | 6 | 20 | 4×7 | 25 | 4 | 42 | 11 |
| 100 | 70 | 83 | – | 41 | 17 | 6 | 20 | 4×9 | 25 | 4 | 42 | 15 |
| 125 | 95 | 108 | – | 51 | 19 | 8 | 21 | 4×9 | 28 | 4 | 44 | 15 |
| 160 | 125 | 140 | 4xM10 | 47 | 22 | 8 | 32 | 4×11 | 45 | 4 | 54 | 17 |
| 200 | 125 | 140 | 4xM10 | 75 | 32 | 12 | 44 | 4×11 | 50 | 4 | 72 | 17 |
| 250 | 200 | 224 | 4xM12 | 75 | 32 | 12 | 44 | 4×13 | 60 | 5 | 72 | 20 |
| 315 | 200 | 224 | 4xM12 | 100 | 36 | 14 | 49 | 4×13 | 75 | 5 | 80 | 20 |
| 350 | 260 | 286 | – | 100 | 37 | 14 | 60 | 4×13 | 75 | 5 | 92,5 | 20 |
| 400 | 260 | 286 | – | 100 | 37 | 14 | 60 | 4×13 | 105 | 5 | 92,5 | 20 |
| Ø | M (Nm) | F (kN) | n (min-1) |
|---|---|---|---|
| 85 | 10 | 20 | 4800 |
| 100 | 15 | 26 | 4200 |
| 125 | 22 | 36 | 3700 |
| 160 | 38 | 46 | 3000 |
| 200 | 54 | 74 | 2300 |
| 250 | 80 | 94 | 1700 |
| 315 | 94 | 126 | 1500 |
| 350 | 94 | 126 | 1300 |
| 400 | 94 | 126 | 1300 |
Max. torque M, max. gripping force F, max. speeds n
